Hardware
- > Introduction
- > PCB
- > Cables
Firmware
- > Introduction
- > HEX files
Software
- > Introduction
- > Download
- > User guide
Other
- > Home
- > Links
Site Designed for 1024x768
Above: The artwork for the track side of the PCB, no need to flip it, just use it how it is(the text should be the right way around when you look at the track side of the pcb). Right click the image, select save picture as, open it in your prefered graphics program (I recommend Irfan view - see links section) and print it at 100x160 mm
Below: Component placement shown looking from the front of the pcb, consult the table below for component information
| Label | Component | Value | Rating | Rapid Part No. |
|---|---|---|---|---|
| R1 | Resistor | 0 Ohms | 0.25W | 62-0314 |
| R2 | Resistor | 22K Ohms | 0.25W | 62-0402 |
| R3 | Resistor | 10K Ohms | 0.25W | 62-0394 |
| R4, R5, R7, (R8-R23) | Resistor | 1K Ohms | 0.25W | 62-0370 |
| R6 | Resistor | 4K7 Ohms | 0.25W | 62-0386 |
| (R24-R31) | Resistor | 1K Ohms | 0.5W | 62-0556 |
| (L1-L8) | Light Emmiting Diode | 5mm Yellow | 2v | 55-1794 |
| L9, L11 | Light Emmiting Diode | 5mm Green | 2v | 55-1792 |
| L10 | Light Emmiting Diode | 5mm Red | 2v | 55-1790 |
| D1, D2 | Diode | 1N4001 | 1A | 47-3130 |
| V1 | Voltage Regulator | 7805 (**) | 5V, 1A | 47-3312 |
| C1 | Ceramic Capacitor | X7R dielectic | 100N, 100V | 08-1015 |
| CR1 | 3 Pin Ceramic resonator | 20 Mhz (*) | 90-0685 | |
| IC1 | PIC Micro-controller | 16F627-20/IP (*) | 73-3260 | |
| (TR1-TR8) | Isolated tab Triac | BTA08 600B (**) | 400v, 8A | 47-3254 |
| (IC2-IC9) | Traic Opto-Isolator | Moc 3020 | 400V, 0.1A | 58-0890 |
| S1 | Board Mount push-to-make switch | 78-0150 | ||
| (TER1-TER8) | Board Mount terminal block | 5mm, 3 Way | 16A | 21-0114 |
| SKT1 | DIL socket | 18 Pin | 22-0165 | |
| CN1, CN2 | Communications Socket | RJ45 | 24-0465 |
NOTE:
(*) - These parts are specified becuase they give maximum performance and should be easy to obtain, others can be used please see the firmware pages for more info.
(**) - These parts should be mounted on a heatsink, triacs it is important for, volatge regulator, not quite so important.